Sala immersiva a U

Panoramica

Reference design 1

Ecco due progetti di riferimento che mostrano come creare una stanza immersiva con tre pareti che mostrano senza soluzione di continuità un contenuto su più schermi.

Projectors: With certain control of ambient lighting, it’s essential to use three projectors with at least 5000lm brightness and minimum FHD resolution.
Image processing: Use the M813 if you want to control all image processing functions in one device. If your projectors have sufficient built-in edge blending and warping capabilities, opt for the G406.
Input source: Use a playback device capable of outputting a signal with a resolution of at least 5760×1200. Alternatively, use the G901 to combine two 4K sources into a single customized-resolution signal. This signal can then be fed into the M813 or G406, streamlining the workflow and increasing flexibility in input source adaptation.
Note that the content needs to be created in the same aspect ratio of the entire wall. In this case, the content should be made in the aspect ratio of (3+3+3) : 2.

U-shaped room with three walls, each measuring approximately 3 meters wide and 2 meters high.

Reference design 2

With certain control of ambient lighting, it’s essential to use four projectors with at least 5000lm brightness and minimum FHD resolution.
Use the M814 if you want to control all image processing functions in one device. If your projectors have sufficient built-in edge blending and warping capabilities, choose the G406.
Input source: Use a playback device capable of outputting a signal with a resolution of 7680×1200 for optimized image quality. Alternatively, use the G901 to combine two 4K sources into a single signal of up to 7680×1200@60hz. This signal can then be fed into the M814 or G406, streamlining the workflow and increasing flexibility in input source adaptation.
Note that the content needs to be created in the same aspect ratio of the entire wall. In this case, the content should be made in the aspect ratio of (3+5+3) : 2.

U-shaped room with 3 walls. The middle wall is longer in around 5 meters wide and 2 meters hight, each side wall is around 3 meters wide.

Come scegliere i proiettori giusti

In base alle dimensioni della parete, alla distanza di visione e alla luce ambientale, è possibile decidere quanti proiettori sono necessari per coprire la parete e le specifiche dei proiettori, come luminosità, risoluzione e rapporto di proiezione. Fate clic sull'articolo seguente per ottenere i suggerimenti sulla scelta del proiettore.

Clicca qui

Come preparare i contenuti

GeoBox consente l'utilizzo di qualsiasi dispositivo di riproduzione; la scelta di quello giusto è fondamentale per un flusso di lavoro fluido e per una distribuzione dei contenuti senza interruzioni, migliorando l'esperienza dello spettatore.

Clicca qui

Casi di studio

Una vetrina dell'eredità e del futuro di Bosch attraverso un'integrazione tecnologica immersiva

The ‘Igniting Minds’ exhibition, UK

GeoBox Transforms Interior Design through Immersive Technology

Interior Designer office in Andalusia, Spain

Elevating the Shopping Experience: IKEA’s Immersive Technology in the Heart of Paris

IKEA in Paris, France