G800 - MatrixWorks Europe

G800 / G810

Highlights:

Edge blending
Up to 120×68 points of geometric alignment for sophisticated image warping.
Embedded video wall function, no image splitter is required.
4K loop out port for daisy chain connection in cascade application.
Easy configuration via IR remote, PC tool, or WebGUI.

Product summary:

GeoBox edge blending processor can perform curved edge blending up to 4 projectors from one box, and more projectors can be controlled by cascading multiple boxes. Advanced warp technology is embedded to allow user to use low cost projector to get the same performance. It is pure hardware standalone system. All operations can be implemented through, IR remote controller, USB, RS232 or Ethernet. No additional PC, Zero Client, or software tool is required.

Product line up

G802 / G812

G804 / G814

G802 / G812

G804 / G814

Key specification

	G802	G804
Channel	2	4
Output	HDMI x 2 HDMI-loop-out x 1	HDMI x 4 HDMI-loop-out x 2
Max. Output resolution	1920x1200@60hz	1920x1200@60hz
Input	HDMI 2.0x 2 DP x1 VGA x1	HDMI 2.0x 4 DP x2 VGA x2
Max. Input resolution	HDMI: 4096x2160@60hz or 7680x1200@30hz	HDMI: 4096x2160@60hz or 7680x1200@30hz

Functions and Features

Built-in Edge Blending

4-side Edge blending on flat & curved surface up to H=1920 Px, V=1200 Px.
Discrete RGB gamma correction.

Corner wall Alignment

Geometry alignment at corner wall in both horizontal and vertical direction at any location.

Linear grid line adjustment to get perfect image

To compensate different scaling factors when projecting on surface wall with edge blending or warping alignment.

Pure hardware, PC-less solution

All-in-one box solution for seamless edge blending. No PC (zero client) is required. Easy setup via IR remote, front panel keypad, USB, RS232 & Ethernet.

Multi-units cascade

HDMI 2.0 loop-through port for multiple units cascade.

Advanced warp and Geometry alignment technology

• precise 17×9 control point geometry alignment and 120×68 control point pixel (only G810) position fine-tuning through an intuitive IR controller or PC software tool via Ethernet or USB connection.
• Flexible grid patterns.

Image rotation, flip

lndividual 90/180/270 rotation, flip, cropping, sealing & color adjustment in each channel.

9-region Black level uplift

Nine region precise Black Level Uplift to compensate light leakage from projectors. Watch the feature DEMO.

Selectable Frame-Sync

User can select Frame Loek, Phase Loek or Free Run based on system requirements.
50Hz in/ 50Hz out.
Perfect synchronization can be achieved.

System control

Completed functions for seamless edge blending. Easy setup via IR, front panel Keypad, USB, RS232 & Ethernet. No PC is required.

EDID

Selectable and programmable EDID in the range: H=1024-3840, V=720-2400.

Edge Mask

Image SHIFT to execute edge mask up to 500 pixels following the image after geometry adjustment and [Edge Mask] with 8 adjustment points to provide irregular edge mask with random edge position up to 900 pixels in H&V directions at each control points.